Ngwa
Ihe mkpuchi aluminom-plastic / mkpuchi aluminom dị ọcha / mkpuchi ọnyà / mkpuchi a kapịrị ọnụ / mkpuchi plastik /
Ịgba ọgwụ mgbochi ọrịa / biopharmaceuticals / ịchọ mma / nlekọta ahụike / ihe kacha mkpa / ngwọta ọnụ / injections
Nkọwapụta:
| Voltaji: | 220V 50/60Hz |
| Ike: | 2KW |
| Na-ejuputa nozzle: | Otu ma ọ bụ okpukpu abụọ |
| nrụgide ọrụ: | 0.4-0.6Mpa(A na-atụ aro ka iji ihe karịrị 7.5Kw maka mmepụta, na ikike nchekwa ikuku nke ikuku compressor karịrị 100L) |
| Oriri gas: | 60L/min |
| Nkọwa karama dabara adaba: | 5,7,10ml(ya na otu dayameta ahụ, ekwesịrị ịnye ihe nlele n'ihu) |
| Ọsọ mmepụta: | 20-30 karama / min ma ọ bụ40-50 karama / min (rụtụ aka5ml, viscosity ọsọ dị iche iche na-agbanwe agbanwe) |
| Usoro njuputa: | Ịdị mma mgbapụta nke na-adịgide adịgide: 0.3-0.5% |
| Njuputa olu: | 1-5ml, 5-10ml(A pụghị iji karama nwere dayameta dị iche iche n'otu karama) |
| Usoro mkpuchi ala: | efere na-ama jijiji |
| Usoro nkwụnye ala: | efere na-ama jijiji |
| Ihe mkpuchi nke Perspex: | Ebubatara 10mm siri ike |
Atụmatụ:
1.Ngwa servo na-etinye onwe ya na-eme ka onye na-anya ụgbọ ala servo dị obere na ìhè, nke dị mma maka ntinye na nhazi akụkụ.Ụlọ ọrụ ahụ kwụsiri ike na ọ dịghị mfe ịgbanwe.
2.Emebere isi ihe ndochi mgbochi mbụ nke ọma maka ihe ịchọ mma na mmanụ dị mkpa, nke nwere ike igbochi ntapu nke ọma.
3.Igwe na-ebuli efere ọhụrụ na-ama jijiji dị mfe iji ma nwee ike ịhazigharị ya site na otu onye na-arụ ọrụ n'ihe na-erughị nkeji ise na-enweghị ịkwaga ma ọ bụ mezie iko ụkwụ.
4. Mgbe dayameta ọnụ karama na-agbanwe agbanwe, ịdị elu akara akara, yana ọrụ mkpu na-akpaghị aka maka enweghị plọg dị n'ime.
5.Dị ka njirimara nke karama iko ( karama ndị nwere otu nkọwa ga-enwe ọdịiche dị n'etiti), a na-emepụta ngwaọrụ nkwụnye n'ime n'ime ya.
6.Ngwa karama na-agbawa vial filler nwere ike igbochi karama ahụ nke ọma ka ị mechie ma gbawaa n'ihi mkpuchi karama na-abụghị ọkọlọtọ.
7.A na-anakwere usoro njikwa mgbanwe ugboro ọhụrụ iji ghọta ndakọrịta nke butyl roba (isi awọ) na plọg silicone (ọcha) iji hụ na mwepụta nke ọma.
8.Igwe ndochi vial na nkwụsị nke mbụ nke ịbanye na ịpụ n'otu ụzọ ahụ na-eme ka a mara na karama ahụ agaghị agbanye mgbe ị na-ebutu karama ahụ, ọ kwụsiri ike ma bụrụ nke a pụrụ ịdabere na ya.
9.Igwe na-ejuputa vial na igwe mkpuchi na-agbaso usoro mgbachi-jaw atọ, na-anabata efere ígwè ebubata ma menyụọ ma sie ike, ọ gaghị emepụta akara ịkpụ na ibe aluminom n'oge ọrụ.
10.Igwe na-ejuputa vial dum dị obere, ma Fuma wheel na-ebugharị ya, nke nwere ike ịkwanye ma dọpụta ya ngwa ngwa site n'otu onye.
Nhọrọ omenala:
- Efere mkpuchi mkpuchi nwere ike ịdị n'ime ma ọ bụ n'èzí n'ime akwa ahụ
- Tinye mkpuchi mkpuchi laminar
- Oke ikike
- Enwere ike ijikọ ya na igwe eji akara akpaaka na ngwa inkjet
